Santec VTC-262PWD Bedienungsanleitung Seite 32

Picture 7a: Only for camera VTC-262PWD
Picture 7b: Only for camera VTC-274PWDU
If no RJ-45 connector is to be user, there is a RJ-45 screw terminal adapter (included in the
delivery) with connections for UTP video, RS-485 and DC power jack.
In addition, there is video signal via BNC plug (for direct connection of 75 Ohm coaxial
cables).
Separate RJ-45 screw terminal adapter:
UTP (twisted pair) connector:
1. Video +
2. Video –
RS-485 connector:
3. RX +
4. RX –
Picture 8: Only for camera VTC-274PWDU
RJ-45 system connector: Pins (front view of RJ-45 jack):
_________________________________________________________________________________
Bedienungsanleitung / User manual VTC-262PWD / VTC-274PWDU
Additional video text connector (BNC plug)
RJ-45 system connector
- 32 -
video (BNC plug)
power supply
(DC plug)
DC power jack
Pin:
1 Video UTP
2 Video UTP
3 RS-485 +
4 Power supply – or ~
5 Power supply + or ~
6 RS-485 -
7 Power supply + or ~
8 Power supply – or ~