SCHUBERTH F 220 Gebrauchsanleitung Seite 22

Changes to the helmet
Important! The standard version of your helmet meets the applicable standards
and it must therefore not be changed or equipped with third-party components
or accessories of any kind. The replacement of individual components is only per-
mitted if they are of the same type as the individual components of the type-ap-
proved helmet, or if they have been specially approved for replacement by
SCHUBERTH. Incorrect or third-party internal features, the subsequent drilling
of holes for accessories or any other changes to the helmet may affect the pro-
tective function and void the certification. Only accessories that are suitable for
the SCHUBERTH F 220 must be used. If in doubt, please contact SCHUBERTH.
Service life - firefighter's helmet
In accordance with standard EN 443:2008, the service life duration of this helmet is
influenced by the types of materials used in its construction, as well as the environ-
ments in which the helmet is used and stored. This firefighter's helmet with painted
shell, which is made of modified high temperature-resistant thermoset material (high
temp fibre) has excellent resistance to ageing and undergoes no change when it is
exposed to direct sunlight (UV radiation). The service life of these helmets is limited
mainly by mechanical, thermal, weather-related and chemical impacts. Care, regular
maintenance and the type of use also play a role.
Thermoset materials (such as the high temp fibre used) are generally considered to
be highly resistant to these stresses. Their resistance to weather-related, chemical
and thermal stresses is clearly far greater than that of thermoplastic materials.
Important! SCHUBERTH fire helmets have no mandatory service life or expiry/
discard date, since the maximum service life depends on the abovementioned
effects.
23