Herunterladen Inhalt Inhalt Diese Seite drucken

Required Tools - Empasa Start Montageanleitung

Vorschau ausblenden Andere Handbücher für Start:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

References / Safety instructions
Caution!
This symbol indicates that ignoring this instruction can lead to danger to the user or damage to the product.
Liability
In case of Ignoring the notes and information given in this instruction, improper or unintended use, the manufacturer rejects
liability for any product damage. Liability for consequential damage to any parts or persons is excluded.
Safety instructions
Keep plastic bags and small parts away from toddlers! risk of suffocation!
Be careful in using the cutter and other tools! Risk of injury!
Do not lean against the insect screen frame, the construction can fall apart due to heavy pressure. Danger of falling!
Caution!
Do not expose the fabric or any plastic parts to open fire or other heat sources.
Intended use
The insect screen product is only allowed to be used for the intended, non-commercial use (assembly on top of the existing
window frames). Use other than as intended can lead to substantial dangers.
Additional loading of this product by attaching further devices or operation beyond the mechanical limits can cause damage to
the product and is therefore not allowed. The manufacturer is not liable for the resulting damages.
Assembly instructions
Condensation can appear between the window frame and the insect screen due to weather conditions and temperature
fluctuations. Make sure of a sufficient amount of ventilation or dry these parts to avoid damage of the product and / or the
window and door frame. Caution! In individual cases high weather conditions (for example: heat, UV radiation) that have an
impact on the insect screen and window frame, can cause little discolorations on the product and / or the window and door
frame.
The finished construction is attached to the existing window frame from the outside. The attachment surface is about 2,0 cm.
The minimum distance between window and shutters / blinds is about 1,0 cm.
Do not use for windows with a weatherboard!

Required tools

EP01043
Hacksaw
Ÿ
Tape measure
Ÿ
Metal file
Ÿ
Rubber hammer
Ÿ
Cutter
Ÿ
Tongs
Ÿ
Pencil
Ÿ
Mitre box
Ÿ
crosstip screwdriver
Ÿ
9
V1/2019-10161

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis