21. Lösen der Steckverbindung
Nach Niederdrücken der Drucktaste am
Deckel den Verriegelungshebel vollständig
öffnen. Der Verriegelungshebel rastet
spürbar ein (siehe Abb. 22).
Steckverbindung von der Messerleiste
abziehen.
© Robert Bosch GmbH 2015. Alle Rechte vorbehalten, auch bzgl. jeder Verfügung, Verwertung, Reproduktion, Bearbeitung, Weitergabe sowie für den Fall von Schutzrechtsanmeldungen.
© Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Vertraulich / Confidential
Montagevorschrift /
Assembly Instruction
Fig. 21: lever engagement in end position
Abb. 21: Verriegelungshebel in Endstellung verrastet
Fig. 22: Unmounting
Abb. 22: Lösevorgang
1 928 A01 41M-9012
Seite
Datum/ Date
21. Unmounting of the connector
After pressing down the locking hook on
the cover open the lever. The locking
lever can be felt to snap into place (refer
to fig. 22).
Remove the connector from the pin
header.
21
22
von/of
25.11.2016