Adding A New User Pin In Admin Mode; Changing The User Pin In Admin Mode; Deleting The User Pin In Admin Mode - iStorage diskAshur2 Benutzerhandbuch

9. Adding a new User PIN in Admin Mode

To add a New User, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode, press and hold down
"UNLOCK + 3" buttons
2. Enter New User PIN and press "UNLOCK" button
3. Re-enter the New User PIN and press "UNLOCK"
button

10. Changing the User PIN in Admin Mode

To change an existing User PIN, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin
Mode (solid BLUE LED) proceed with the following steps.
1. In Admin mode, press and hold down
"UNLOCK + 3" buttons
2. Enter New User PIN and press "UNLOCK" button
3. Re-enter the New User PIN and press "UNLOCK"
button

11. Deleting the User PIN in Admin Mode

To delete a User PIN, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode, press and hold down
) + 3" buttons
"SHIFT (
2. Press and hold down "SHIFT (
again.
) + 3" buttons
www.istorage-uk.com
Solid BLUE LED will change to blinking
and solid BLUE LEDs
Blinking GREEN and solid BLUE
switch to a single GREEN LED blink and then
back to blinking GREEN and solid
GREEN LED rapidly blinks for a few seconds
then changes to a solid BLUE
User PIN has been successfully created
Solid BLUE LED will change to blinking
and solid BLUE LEDs
Blinking GREEN and solid BLUE
switch to a single GREEN LED blink and then
back to blinking GREEN and solid
GREEN LED rapidly blinks for a few seconds
then changes to a solid BLUE
User PIN has been successfully changed
Solid BLUE LED will change to blinking
LED
Blinking RED LED will change to solid
LED and then to a solid BLUE
the User PIN was successfully deleted
GREEN
LEDs will
BLUE LEDs
LED indicating the
GREEN
LEDs will
BLUE LEDs
LED indicating the
RED
RED
LED indicating
#11