Initialising And Formatting The Diskashur - iStorage diskAshur2 Benutzerhandbuch

27. Initialising and formatting the diskAshur

After a 'Brute Force Attack' or a complete reset of the diskAshur
You will need to initialise and format the diskAshur
To initialise your diskAshur
1. Attach the diskAshur to the computer.
2
2. Create a new Admin PIN - see page 14, section 17, 'How to create an Admin PIN after a Brute Force attack or reset'.
3. With the diskAshur in standby state
2
4. Windows 7: Right click Computer and then click Manage and then select Disk Management
Windows 8: Right-click left corner of desktop and select Disk Management
Windows 10: Right click on the start button and select Disk Management
5. In the Computer Manage window, click Disk Management. In the Disk Management window, the diskAshur
recognised as an unknown device that is uninitialised and unallocated.
Note: If the Initialise Disk Wizard window opens, click Cancel.
6. Right-click Unknown Disk, and then select Initialise Disk.
before it can be used.
2
, do the following:
2
(RED LED) enter New Admin PIN to unlock
2
will delete all data, encryption key and partition settings.
2
www.istorage-uk.com
(GREEN LED).
is
2
#19