How To Check Firmware In User Mode - iStorage diskAshur2 Benutzerhandbuch

32. How to check Firmware in User Mode

To check the firmware revision number, first enter the "User Mode" as described in section 21. Once the drive is in User
Mode (solid GREEN LED) proceed with the following steps.
1. In User mode press and hold down "3 + 8" until
GREEN and BLUE LEDs blink together
2. Press the "UNLOCK" button and the following happens;
a. All LED's (RED, GREEN
b. RED LED blinks indicating the integral part of the firmware revision number.
c. GREEN LED blinks indicating the fractional part.
d. All LED's (RED, GREEN
e. LEDs return to solid GREEN
For example, if the firmware revision number is '1.2', the
times. Once the sequence has ended the RED,
LED.
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
GREEN &
www.istorage-uk.com
Solid GREEN
GREEN
RED LED will blink once (1) and the
BLUE LED's will blink together once and then return to a solid
LED will change to blinking
and BLUE LEDs
GREEN LED will blink two (2)
BLUE
#27