How To Check The User Pin Policy - iStorage diskAshur2 Benutzerhandbuch

To set a User PIN Policy, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode, press and hold down
"UNLOCK + 7" buttons
2. Enter your 3 digits, remember the first two digits
denote minimum PIN length and last digit (0 or 1)
whether or not a special character has been used.
3. Press the "SHIFT" (

8. How to check the User PIN Policy

The Administrator is able to check the User PIN Policy and can identify the minimum PIN length restriction and whether or
not the use of a Special Character has been set by noting the LED sequence as described below.
To check the User PIN Policy, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down
SHIFT ( ) + 7
2. Press the "UNLOCK" button and the following happens;
a. All LED's (RED, GREEN
b. A RED LED blink equates to ten (10) units of a PIN.
c. Every GREEN LED blink equates to a single (1) unit of a PIN
d. A BLUE blink indicates that a 'Special Character' was used.
e. All LED's (RED, GREEN
f. LEDs return to solid BLUE
The table below describes the LED behaviour whilst checking the User PIN Policy, for instance if you have set a 12 digit User
PIN with the use of a Special Character, the
single BLUE LED blink indicating that a Special Character must be used.
PIN Description
12 digit PIN with use of a Special Character
12 digit PIN with NO Special Character used
9 digit PIN with use of a Special Character
9 digit PIN with NO Special Character used
#10
) button once
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
RED LED will blink once (1) and the
Solid
and solid
Blinking
continue to blink
Blinking
a solid
LED indicating the User PIN Policy has been
successfully set.
Solid
and BLUE
GREEN
3 digit Setup RED
121 1 Blink
120 1 Blink
091 0
090 0
www.istorage-uk.com
BLUE LED will change to blinking
BLUE LEDs
GREEN and solid BLUE LEDs will
GREEN and Solid BLUE
GREEN LED and finally to a solid
BLUE LED will change to blinking
LEDs
will blink twice (2) followed by a
GREEN
2 Blinks
2 Blinks
9 Blinks
9 Blinks
GREEN
will change to
BLUE
GREEN
BLUE
1 Blink
0
1 Blink
0