Inhaltsverzeichnis
Werbung
• Do not use humidifiers or heated humidified oxygen over the device since
the HME will become too wet.
2. Instructions for use
The device is for single use and must be replaced at least every 24 hours, or
more often as needed (e.g. if clogged by mucus or wet).
To use Freevent XtraCare, gently attach the device to the tube using a twisting
motion (Fig. 1). To remove the device from the tracheostomy tube, hold the
tracheostomy tube in place and gently pull the device using a twisting motion.
2.1 Disposal
Always follow medical practice and national requirements regarding biohazard
when disposing of a used medical device.
3. Compatible products
Freevent O
Adaptor / Freevent O
Adaptor Mini:
2
2
Freevent O
Adaptor / Freevent O
Adaptor Mini are an accessory for patients
2
2
requiring supplemental oxygen. The adaptor connects oxygen tubing of 1/8 inch
(3.2 mm) diameter to the oxygen port. CAUTION: The adaptor is for single
use and should be replaced at least every 24 hours, or when it becomes dirty,
contaminated or shows any signs of damage.
Attach and detach the O
Adaptor to the device as shown in Fig. 2 and Fig. 4.
2
Attach the oxygen tubing to the adaptor as shown in Fig. 3. Make sure the oxygen
tube goes beyond the conical edge of the connector (Fig. 3).
For additional help or information, please see back cover of the Instructions
for Use for contact information.
4. Reporting
Please note that any serious incident that has occurred in relation to the device
shall be reported to the manufacturer and the national authority of the country
in which the user and/or patient resides.
16
Werbung
Inhaltsverzeichnis
