Burners; Switching On Manually; Switching On Automatically - Bosch prr 726 b 90 e Gebrauchsanweisung

Gas burners
Operation
Fig. 1
Fig. 2
Fig. 3

Switching on manually

Switching on
automatically
8
There are indications to show which burner each control
knob operates. Fig. 1.
It is essential to ensure that all the burner parts
and pan supports are correctly installed for the
appliance to work correctly. Fig. 2-3-4.
Fig. 4
1. Press the chosen burner control knob and turn it
anticlockwise to the required setting.
2. Use any type of lighter or flame (cigarette lighter,
matches, etc.) and bring it close to the burner.
If your hob can be switched on automatically (ignition
sparkers):
1. Press the chosen burner control knob and turn it
anticlockwise to the maximum power setting.
While the control knob is still pressed down, sparks are
produced on all burners. The flame ignites (it is no longer
necessary to press down the control knob).
2. Turn the control knob to the required setting.
If it does not come on, turn the control knob to the off
setting and repeat the steps above. This time, press and
hold the control knob for longer (up to 10 seconds).