Turning On; Use; Meaning Led Lights - Paj GPS EASY FINDER Bedienungsanleitung

2.5 Turning on

Once the activation has been successful, you can
switch on the FINDER. It has two buttons on the front,
one below the other. The upper button with the on/off
sign is used to start and shut down the FINDER.
To switch on your FINDER, press this button for 3
seconds. As soon as the FINDER has a GPS signal, the
blue LED flashes. To switch it off, this button must be
pressed briefly and vigorously three times in
succession. For the device with switch-off protection,
this button must be pressed 8 times.
For the initial startup of the EASY Finder
uncovered locations, such as the garden or the
terrace (i. e. not inside the home, the garage, the
cellar or the like) are recommended.

2.6 Use

Once the activation and switching on of the FINDER
has been successful, you can attach the FINDER to a
location of your choice and view the position of the
FINDER using a smartphone, tablet or PC. Please use
our app or go to the following website:
www.finder-portal.com

2.7 Meaning LED lights

S
IGNAL
The green LED is off
The green LED flashes
every 2–3 seconds
S
IGNAL
The blue LED flashes
every 2–3 seconds
The blue LED
is off
The blue LED is
constantly lit
EASY Finder by PAJ with ONLINE-Tracking V.1.2 EN
© PAJ UG (haftungsbeschränkt)
16
The portal will support you step by step in its
functions.
green LED – GPRS status
M
Standby mode
GPRS signal is available
blue LED – GPS status
M
GPS reception available
standby mode
If the GPS tracker is not (no
longer) moved, the GPS
signal turns off. As soon as
the GPS tracker is moved
again, the GPS signal
automatically switches on
again.
No signal available. GPS
tracker is looking for a
signal
EANING
EANING