Turning On/Off; Use - Paj GPS POWER FINDER 4G Bedienungsanleitung

To use the POWER Finder 4G by PAJ it must be
activated online first.
Please go to
www.start.finder-portal.com
and follow the instructions.

2.5 Turning on/off

Recommended first step: To receive the best GPS
signal place the POWER Finder 4G outside and
make sure it is not covered. Avoid garages,
basements and similar.
If the activation has been carried out successfully, the
FINDER can be switched on. please follow these
instructions:
1) Open the housing cover
2) Remove the rubber cover
Please do not remove or change the SIM card!
3) Slide the slider to "ON"
4) Put the rubber cover
back into the device
Please briefly press the battery button once.
BEHAVIOR
The red LED and battery
indicator light up for
approx. 20 seconds
Red LED and battery
indicator remain switched
off

2.6 Use

Once the activation, switching on and the transfer of
a first database has been successful, you can place
the FINDER in a location of your choice and take a
look at the FINDER´s location by using a smartphone,
tablet or PC. Use our app or go to the following
website:
POWER Finder 4G by PAJ with Online-Tracking V.1.0 EN
© PAJ UG (haftungsbeschränkt)
15
5) Click the housing cover back
into the device
The button next to the charging socket is only
used to display the battery. Just press the button
once!
How do I see if the FINDER is on?
www.finder-portal.com
S
TATUS
FINDER is switched on
FINDER is switched off