Charging The Powerbank With Compressor; Charging Mobile Phones And Tablets; Using The Integrated Compressor - ULTIMATE SPEED UPK 10 C1 Originalbetriebsanleitung

Using the device
z Charging the power-
bank with compressor
Connect the powerbank with
„ „
compressor
1
the network adapter
To do so, plug the cable from the
„ „
power adapter
ing port (15 V
the powerbank with compressor
and then plug into a mains
1
power socket.
Attention: Only use the power
adapter as supplied
device!
Note: An undervoltage protection
circuit is installed in the powerbank
with compressor
device from damage. This prevents
a deep discharge of the powerbank
with compressor
cally switches the device off once
the battery is fully discharged. In this
case, only one of the four blue indi-
cator lights will be lit
no more energy can be obtained
and the compressor function will be
deactivated. Please recharge the
powerbank with compressor
a network adapter
z Charging mobile
phones and tablets
Press the power switch for the
„ „
powerbank with compressor
once.
36 GB/IE
to a socket using
.
24
into the charg-
24
/0.4 A) on
10
with the
24
to protect the
1
and automati-
1
. In this case,
13
using
1
.
24
9
Connect a suitable USB
„ „
charging cable to the USB port
(5V /2A)
11
(5V /1A)
into your mobile phone or tablet.
The charging process starts
„ „
automatically.
Note: You cannot charge USB
devices (e.g. mobile phone, tablet)
while the powerbank with compres-
sor itself is being charged.
1
z Using the integrated
compressor
Remove the cover cap for the
„ „
hose connection
connection
15
with compressor
the compressed air hose
to the hose connection
powerbank with compressor
(see Fig. C).
Place the device on a level and
„ „
non-flammable surface. Do not
operate the device in a dusty
environment. This is a fire risk
and the device could also be
damaged.
Note: Depending on the inflatable
item, you can either use the com-
pressed air hose
together with the valve adapters
and supplied in the scope of
22 23
delivery.
or the USB port
and then plug it
12
from the hose
16
of the powerbank
. Then screw
1
on
17
of the
15
1
directly or use it
17
21
,