Pkm BIC5I-GK-IX3X Bedienungsanleitung Seite 59

The seal must be fitted tightly on the bottom edge of the hob (no overlaps, no
gaps etc.) to prevent liquids etc. from entering the installation opening
subsequently.
2. Install the fixing brackets on the sides of the hob using the appropriate screws:
screw one end of the fixing brackets into the predrilled holes on the sides of
the hob (s. fig. below).
3. Insert the hob into the installation opening and push it downward carefully until
the hob and the seal are in firm contact to the worktop (s. fig. below).
The hob must be ventilated properly. The air inlet and outlet must never be
blocked or covered.
1
2
3
4
5
NOTICE! The hob must be in the installation opening of the worktop
properly and firmly. Check the seal for perfect fit and overall cover.
M
OUNTING OF THE FIXING BRACKETS
59
W
ORKTOP
S
CREW
B
RACKET
H
OB
S
EAL
: