Herunterladen Inhalt Inhalt Diese Seite drucken

HBM QuantumX Kurzanleitung Seite 6

Vorschau ausblenden Andere Handbücher für QuantumX:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6
Conditions on site
For modules in IP20 protection class:
− Protect the modules from humidity or effects of the weather such as rain,
snow, etc.
− The permissible relative humidity at 31°C is 80% (non condensing); linear
reduction down to 50% at 40°C.
− Ensure that the ventilation openings on the sides are not covered.
For all modules:
− Do not expose the instrument to direct sunlight.
− Observe the maximum permissible ambient temperatures given in the
specifications.
Maintenance and cleaning
The modules are maintenance-free. Please note the following when cleaning
the housing:
− Before cleaning, disconnect the equipment completely.
− Clean the housing with a soft, slightly damp (not wet!) cloth. Never use
solvents, since these could damage the labelling on the front panel and the
display.
− When cleaning, ensure that no liquid gets into the module or connections.
General dangers of failing to follow the safety instructions
The module is a state of the art device and as such is failsafe. The module
may give rise to further dangers if it is inappropriately installed and operated
by untrained personnel. Any person instructed to carry out installation,
commissioning, maintenance or repair of the module must have read and
understood the Operating Manuals and in particular the technical safety
instructions.
Remaining dangers
The scope of supply and performance of the module covers only a small area
of measurement technology. In addition, equipment planners, installers and
operators should plan, implement and respond to the safety engineering
considerations of measurement technology in such a way as to minimize
remaining dangers. Prevailing regulations must be complied with at all times.
There must be reference to the remaining dangers connected with
measurement technology. After making settings and carrying out activities that
are password−protected, you must make sure that any controls that may be
connected remain in safe condition until the switching performance of the
module has been tested.
HBM
QuantumX
A2361-3.2 en/de

Werbung

Kapitel

Inhaltsverzeichnis
loading

Verwandte Produkte für HBM QuantumX

Inhaltsverzeichnis