HBM QuantumX Kurzanleitung Seite 7

QuantumX
Working safely
Error messages should only be acknowledged once the cause of the error is
removed and no further danger exists.
Conversions and modifications
The module must not be modified from the design or safety engineering point
of view except with our express agreement. Any modification shall exclude all
liability on our part for any resultant damage.
In particular, any repair or soldering work on motherboards (replacement of
components is prohibited. When exchanging complete modules, use only
original parts from HBM.
The module is delivered from the factory with a fixed hardware and software
configuration. Changes can only be made within the possibilities documented
in the manuals.
Qualified personnel
Qualified persons means persons entrusted with the installation, fitting,
commissioning and operation of the product who possess the appropriate
qualifications for their function. This module is only to be installed and used by
qualified personnel, strictly in accordance with the specifications and the
safety rules and regulations.
This includes people who meet at least one of the three following
requirements:
• Knowledge of the safety concepts of automation technology is a
requirement and as project personnel, you must be familiar with these
concepts.
• As automation plant operating personnel, you have been instructed how to
handle the machinery and are familiar with the operation of the modules
and technologies described in this documentation.
• As commissioning engineers or service engineers, you have successfully
completed the training to qualify you to repair the automation systems. You
are also authorized to activate, to ground and label circuits and equipment
in accordance with safety engineering standards.
It is also essential to comply with the legal and safety requirements for the
application concerned during use. The same applies to the use of
accessories.
A2361-3.2 en/de
7
HBM