18
2.1.2 Ethernet settings: adapt your PC's IP address
If you use your computer in various networks (IP address changes), but your
modules have a fixed IP address, you should use the "Alternative
Configuration" in the TCP/IP properties (fixed IP address and subnet mask,
user-defined)!
Edit the PC settings as follows:
• Open the network connections (Start/Settings/Network connections).
• Mark your LAN connection with a right−click and select "Properties" in the
context menu.
• Select the tab "General" and mark the Internet (TCP/IP) under "This
connection uses the following items". Click on the "Properties" button.
• In the tab "Alternate Configuration", select the option "User-defined" and
enter your data in the "IP address line" and "subnet mask".
HBM
QuantumX
A2361-3.2 en/de