To fire the flash intentionally
Use this mode to intentionally fire the flash without regard to light
conditions.
1.
2.
34
Downloaded from
www.Manualslib.com
Anytime Flash mode
Press the
LCD panel.
Lite Touch Zoom 140ED
Check that the orange and green LEDs light up,
then shoot.
While the orange LED is blinking with the Shutter Release button
pressed lightly, the flash is being charged, and the shutter cannot be
released. Lightly press the Shutter Release button again, and release
the shutter after the orange LED stops blinking and stays lit.
Pressing down on the popped-up flash unit will prevent the flash from
firing. Do NOT touch the flash unit.
Advanced Operations
manuals search engine
button until " " appears on the
Lite Touch Zoom 140ED QD
Example