Temperature Setting - IARP RODI Gebrauchs- Und Bedienungs Anleitungen

RODI 33 R404a
Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
pre-established temperature inside the tank. This temperature adjuster is gauged by the factory and
should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob (4) turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature. Defrosting is manual.
CONTROLS
1) Main Switch
2) Lights Switch
3) Thermometer
4) Thermostat
RODI 33 R290/R404
Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
pre-established temperature inside the tank. This temperature adjuster is gauged by the factory and
should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob (1) turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature. Defrosting is manual.
Light switch

TEMPERATURE SETTING

with Led
-20-
1 2
CONTROLS
1) Thermostat
2) Termometer
COLDER
2
1 3
0 4
7 5
6
3 4
COLDER
2
3
1
0 4
7 5
6
2 1