Gazelle Shimano Steps Schnellstart Seite 55

(H) Current speed*4
EW-EN100
EW-EN100
While power is turned on, the outer side LED2 indicates the battery level.
(I) Current time While power is turned on, the outer side LED2 indicates the battery level.
LED2 indication
LED2 indication
(Lit in green)
(J) Light icon
(Lit in green)
Indicates that the light connected to the drive unit is lit.
(Lit in red)
(Lit in red)
(Blinking red)
(K) Bluetooth® LE icon
(Blinking red)
Displayed when connected over Bluetooth LE.
*1 Only for electronic gear shifting with internal geared hub.
*2 Only for electronic gear shifting with the gear shifting mode set to [Manual].
*3 [Manual] will always be displayed for rear derailleur models.
*4 For SC-E7000, the traveling data displayed in this location can be changed.
„ Changing the assist mode
Changing the assist mode
„ Changing the assist mode
Changing the assist mode with switch unit
Changing the assist mode with switch unit
Changing the assist mode with switch unit
1. Press Assist-X or Assist-Y.
1.
Press Assist-X or Assist-Y.
1.
Press Assist-X or Assist-Y.
Assist
Assist
Function button
Function button
* If using SC-E7000 and there is no assist switch, you can
* If using SC-E7000 and there is no assist switch, you can
also hold the function button down to switch the assist
also hold the function button down to switch the assist
mode. However, it cannot be switched to [WALK] mode.
mode. However, it cannot be switched to [WALK] mode.
Battery level
Battery level
100 - 21%
100 - 21%
20% or less
20% or less
Nearly empty
Nearly empty
Function button
Function button
LED2
LED2
< SC-E6100 >
< SC-E6100 >
< SC-E7000 >
< SC-E7000 >
[HIGH]
[HIGH]
Y X
Y X
[NORM]
[NORM]
[ECO]
[ECO]
[OFF]
[OFF]
Long press Y
Short press X
[WALK]
[WALK]
Long press Y
Short press X
55
EN