Herunterladen Inhalt Inhalt Diese Seite drucken

Notes For Safe Use And Maintenance Of Machine - Dalla Corte DC PRO Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für DC PRO:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 61
notes for a safe use
and maintenance of the machine
This machine must be destined to the use
for which it has been designed. Any other
use shall be considered inappropriate.
The manufacturer shall not be held
responsible for any possible damage
caused by an improper use.
The electrical safety of the machine
is achieved only when the machine is
correctly connected to an earth system.
This fundamental requirement shall
be verified by skilled workers. The
manufacturer and the installer cannot
be held responsible for any possible
damage caused by the lack or in-
efficiency of the system earth.
All manuals and user guides at all-guides.com
The use of any electrical device implies the
observance of some fundamental rules:
• do not use the machine with wet
hands or feet or barefoot.
• the machine must not be used by
persons
(children
reduced physical, sense or mental
faculties or lacking experience or
knowledge, unless they are provided
with surveillance or instructions on the
machine by a person responsible for
their safety.
• Children must be supervised to make
sure they do not play with the machine.
• Disconnect the machine from the
electrical system and close the water
hose before any ordinary cleaning
and maintenance.
• To clean the machine, do not put it
under a jet of water, nor plunge it into
the water.
• Do not leave the switched on machine
unattended for long periods (e.g. 1 day)
• In order to ensure the efficiency and
correct functioning of the machine, it
included)
with
is necessary to follow the instructions
provided by the manufacturer and to
carry out ordinary maintenance.
• The machine must be installed at a
height of at least 1.2 meters.
• A safe functioning of the machine
is obtained by placing it horizontally
(use level) and adjusting its feet.
• The temperature of the environment
surrounding the machine must be
between 5° and 30°C. In case the
machine is temporarily placed in
an environment where temperature
is below 0°C, contact exclusively
37

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis