Periodic Maintenance By The User - Dalla Corte DC PRO Benutzerhandbuch

periodic maintenance by the user

WARNING:
The manufacturer cannot be held
responsible for damage to people,
animals or objects caused by incorrect
maintenance. A proper functioning of
this machine is ensured by its correct
maintenance. It is therefore important
to follow these instructions. Wear
protective gloves for high temperatures
before starting maintenance.
CLEANING BODY PARTS
Clean with non-dripping, damp cloth. Avoid
using abrasive detergents or sponges.
CLEANING PARTS IN CONTACT WITH
COFFEE
Every evening or before turning off the
machine, remove filter holders from
brewing units and the filters from filter
holders 9. Clean all parts with the
All manuals and user guides at all-guides.com
brush (current machine accessory)
and proper detergent in order to avoid
encrusting on external and internal
surfaces. Remove and properly clean
the drip tray and the cup grill.
3
DAILY CLEANING:
CLEANING GROUP HEADS
The machine is equipped with an
automatic group-cleaning cycle. To
start the cycle o f each group, follow the
instructions below:
• Remove the filter holder from the
group to be cleaned, then remove
its filter and replace it with the blind
filter (current machine accessory).
• Put one cleaning tablet (current machine
accessory) in the blind filter, fill the filter
with water and put the filter holder back
in place on the machine.
• Press the WASH button (PD1) for 5
-> pic. 2 & pic. 3
seconds – use buttons (PD1) and (PD2)
to select the group to be cleaned (the
45