Product Description; First Use; Control Panel - IKEA FULLGÖRA Handbuch

ENGLISH

Product description

1
1
2
2
6
5
3
4
6
7
4
5

First use

Connect the appliance to the mains power supply. The ideal
temperatures for preserving food have already been set at the
factory.

Control panel

A I
E
Functions
A
Freezer System Control
Freezer System Control is an advanced technology that reduces
temperature fluctuations in the whole freezer compartment to
minimum.
To activate/deactivate the "Freeze System Control" function
I
press for 3 seconds the
If the function is engaged and the user modify the freezer
temperature out of the working range, the function is
automatically switched off.
In case of Fast freezing is engaged, the function "Freeze System
Control" is inhibited until the Fast Freeze function switched off.
C
On/Stand-by
This function turns On/Stand-by the freezer compartments.
To put the product in Stand-by, press & hold the
3 seconds. When the appliance is in Stand-by, the light inside
the freezer compartment does not work. Remember that this
operation does not disconnect the appliance from the power
supply. To switch the appliance On again, simply press the On/
Stand-By button.
Note: this procedure does not disconnect the appliance from
the electricity supply.
C B D
H F
button.
C
button for
1
Control panel
2
Led light
3
Glass shelves
4
Rating plate
5
flaps freezer
6
Drawers Freezer
Characteristics, technical data and images may vary
according to the model.
Accessories
Freezer block
1x
Note: After switching the appliance on, it will be necessary
to wait for 4 to 5 hours before a temperature suitable for a
standard appliance load is reached.
G
Temperature display
The display shows the freezer compartment temperature
(between -16°C and -24°C). Recommended setting: -18°C or -20°
It is possible to set a different temperature with the
D
Fast Freeze
To activate/deactivate the Fast Freeze function press simply.
The Fast Freeze function switches off automatically after 50 hours.
E
Eco function
The Eco function enables appliance energy consumption to be
concentrated in the reduced rate hours (generally at night),
when electricity is readily available and costs less than during
the daytime (only in countries that utilise a time based multirate
system - check energy rates with the local electricity company).
To activate the function, press
rate start time (depending on the specific rates plan). For
example, if the reduced rate starts at 8 p.m., press the button
E
at that time. When the Eco indicator is ON, the function is
ON. Once the function is activated, the appliance automatically
adapts energy consumption according to the time selected, i.e.
consuming less energy during the day than at night.
Ice tray
1x
A
Freezer System Control
B
Temperature display
C
On/Stand-by
D
Fast Freeze
E
Eco function
F
Black Out alarm
G
Turning off the sound alarm
H
Temperature setting
I
System Control
B
E
for 3 seconds at the reduced
6
H
button.
D