Steinbach BP-39WS-B Mini Originalbetriebsanleitung Seite 53

ON/OFF button. You can set the desired water temperature by pressing the Up
15
Down button.
17
After switching off, the heat exchanger needs to cool down before the fan
stops running. This process can take up to 90 seconds.
Display:
H
14
- The display shows the current water temperature.
14
Saving energy
You can take the following measures to reduce the energy consumption and
the associated costs:
• If you do not use the pool for a few days (e.g. at the weekend), keep the
current water temperature approximately at the level of the desired
water temperature. The heat pump cannot quickly heat the water of the
pool as desired. In the event of a large temperature difference between
the current water temperature and the desired water temperature, it
can take up to several days to reach the desired water temperature.
• If you are not using the pool for more than one week, switch the heat
pump off or reduce the set water temperature.
• Do not use the heat pump if the ambient temperature falls below 15°C.
• Cover the pool to prevent heat loss through wind.
Parameters
In operating mode, the heat pump allows you to display temperatures or make settings
by pressing the SET button
button or the Down button
16
15 16
Set
17
. The desired parameter can be selected by pressing the Up
18
.
17
or
16
53