± (50 ppm +2 % v. Mw.) Testo Service-Stelle schicken. 5000...9.999 ppm: - Der CO2-Fühler ist fest mit dem Messgerät ver- ±(100 ppm +3 % v. Mw.) bunden. Austausch des Fühlers nur bei Testo- Auflösung: 1 ppm bzw. 0,001 Vol.% Servicestellen möglich. Umgebungs- - Häufiges Betauen des Fühlers vermeiden, an-...
Einstellung ändern - Konfiguration „START/STOP“ -Taste während des Einschaltens gedrückt halten. Folgende Einstellungen können geändert werden: Uhrzeit Datum Luftdruck 01:01 1013 Auto ON 00:00 1998 Batterie Auto-OFF- Funktion Gerät aktiv nächste nächste nächste Stelle Stelle Stelle Meß- betrieb 1013 01:01 ACCU Auto OFF 00:00...
Fühler nicht. lassenen Messbereichs Bestelldaten Messgerät testo 535 und Zubehör Bestell-Nr. testo 535, CO2-Messgerät für Raumluftqualitäts-Messung mit festangeschlossenem Fühler, Bedienungsanleitung, Batterien und Kalibrier-Protokoll 0560.5350 TopSafe (unverwüstliche Schutzhülle) inkl. Tischaufsteller und Gürtelclip, zum Schutz des Messgeräts gegen Stöße, Schmutz...
0 to 9,999 ppm CO turer´s calibration. Check the readings in (0 to 0,999 vol.% CO fresh air: 350 to 450 ppm. It is recommended that the instrument is sent to a Testo service Accuracy: 0 to 5000 ppm: point for adjustment purpose.
Changing the settings - Configuration “START/STOP” button: keep pressed when switching on. The following settings can be changed: Time Air pressure Date 01:01 1013 Auto ON 00:00 1998 Auto-OFF Battery in function instrument activated Next Next Next position position position Meas- uring 1013...
Ordering data testo 535 measuring instrument and accessories Part no. testo 535, CO2 measuring instrument for measuring the quality of ambient air, with securely attached probe, instruction manual, batteries and calibration protocol 0560.5350 TopSafe (indestructible protection case) with bench stand and belt clip, to protect instrument from impact, dirt...