Air Quality Indicator (Illuminated Ring); Button Functions; Switching The Appliance On/Off - Silvercrest SLR 30 A1 Bedienungsanleitung Und Sicherheitshinweise

Air quality indicator (illuminated ring)

There is an illuminated ring
different colours to indicate the amount of dirt particles in the room air.
Depending on the quality of the room air, the illuminated ring
of the following colours:
Illuminated ring colour
Blue
Yellow
Red

Button functions

The following table explains the functions of the buttons on the appliance control
1
panel
Button
Switching the appliance on/off
Insert the mains plug of the appliance into a mains socket. You will hear a beep
and all the buttons and indicators on the control panel
appliance is now in standby mode. In standby mode, the On/Off button
lights up continuously.
Briefly press the On/Off button
beep and the active buttons and indicators on the control panel
To switch the appliance into standby mode, briefly press the On/Off button
again. You will hear a beep and all the buttons and indicators on the control
1
panel
SLR 30 A1
w
on the appliance's control panel
:
Function
Switch appliance on/off (standby mode)
Switch the ion function on/off
Select fan speed: Sleep/Low/High/Auto
Switch the timer function on/off
Select operating time (hours): 1 hr/2 hrs/4 hrs/8 hrs
The button lights up: The filter is used up and needs to be replaced
(see section Changing the filter)
Confirm filter change/reset filter timer
apart from the On/Off button
Air quality
Good
Medium
Poor
1
4
to switch the appliance on. You will hear a
4
switch off.
1
, which uses
w
lights up in one
will light up briefly. The
4
1
will light up.
4
GB │ IE │
9 ■