Operating Parameters - G-U ELTRAL S60 Montage- Und Bedienungsanleitung

9

Operating parameters

• Rated voltage
• Cut-off current
• Travel thrust (SHEV)
• Travel length
• Speed tolerance at synchronous operation approx. ± 5 mm
• Lifting speed
at nominal thrust and 24 V DC
• Protection class
• Duty ratio
• Synchronizing with RPM-regulator
• Ambient temperature range
• Triggering temperature for fire detectors
• Load method
• Blockade control
• Overall length
The running direction of the drive is altered by pole reversal effected through the
RWA control centre. However, if the drive is blocked in running direction, the internal
electronics/synchronising control of the drive must reverse poles for 2 seconds before
drive can start running again in the same direction.
Total life-span
Automatic operation (using natural climatic and ventilation control) presupposes a total life-span
of 10.000 ventilation cycles.
Article numbers
Solo
S60, 24 V
S80, 24 V
S100, 24 V
S160, 24 V
02.2012 | G25621 | Printed in Germany
9-39685-10-0-1
9-39685-15-0-1
9-39685-20-0-1
9-39685-25-0-1
9-42898-30-0-1
9-42898-50-0-1
9-42898-78-0-1
9-42898-01-0-1
K-17586-10-0-1
K-17586-20-0-1
K-17586-30-0-1
9-39075-30-0-1
9-39075-50-0-1
9-39075-75-0-1
9-39075-01-0-1
24 V DC, 2 Vpp (min. 19.1, max. 36.4 V DC)
0.8 up to 2.5 A (depending upon drive type)
600 up to 1600 N (depending upon drive type)
100 up to 1000 mm + 7.5 %
depending upon drive type
IP65
S60, S100 = 20 %
S80, S160 = 30 %
yes
- 5°C up to +75°C (German environment class I)
< +68°C
opening against nominal load
closing with backing by nominal load
all 2 minutes for EMERGENCY OPEN
S60, S100:
S80, S160:
S80 Synchro, S160 Synchro: 342 mm + travel
Synchro
--
S80 Synchro, 24 V
--
S160 Synchro, 24 V
256 mm + travel
302 mm + travel
--
K-17584-30-0-1
K-17584-50-0-1
K-17584-75-0-1
K-17584-01-0-1
--
K-18156-30-0-1
K-18156-50-0-1
K-18156-75-0-1
K-18156-01-0-1
17