Switches And Lights; On/Off Button; Technical Data; Machine Installation - ECM Manufacture CASA V Bedienungsanleitung

3.2 Switches and lights

1
2
3
4

3.3 Technical data

Voltages:
Frequency:
Power:
Water tank:
Measurements:
Measurements with portafilter: W x D x H / 210 mm x 410 mm x 380 mm
Weight:
4

MACHINE INSTALLATION

4.1 Preparation for installation

• Place the machine on an even, water-resistant and stable surface.
• Never place the machine on hot surfaces.

4.2 Electrical connection

• Make sure that the local main voltage supply corresponds to the information given on
the type plate on the front panel of the espresso machine.
• Make sure that you use the correct power plug for your country.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord / do not use a multiple socket.
5

FIRST USE

Read the instruction manual carefully prior to operating the machine.
Prior to starting the machine, check if:
• the steam/hot water valve is closed.
• the switch and buttons are not activated.
• the power cord is disconnected.
• the drip tray is inserted accurately.
• the machine is placed on a water resistant surface.
Translation of the original German user manual
1. Light "machine in use"
5

2. On/Off button

3. Light "heating"
6 4. Steam switch
5. Light "coffee button On/Off"
6. Coffee button
7. Light "pump/hot water On/Off"
7
8. Pump/hot water switch
8
Image 1
EU: 230 V
UK: 230 V
Australia: 240 V
US: 110 V
Japan: 100 V
EU: 50 Hz
UK: 50 Hz
Australia: 50 Hz
US: 60 Hz
Japan: 50/ 60 Hz
1.200 W
approx. 2.8 litres
W x D x H / 210 mm x 370 mm x 380 mm
14.0 kg
ENGLISH
19