hanseatic HEKS8854GE Gebrauchsanleitung Seite 60

Page EN-26 Start-up
Installation materials (package contents)
No. Name
(a) Elbows
(b) Door couplers
(c) Cover strips, long
(d) Cover strips, short
(e) Screws
(f) Joint profile
1. Remove the glass shelves (8) and (9),
vegetable drawers (7) and the door
shelves (4) to (6) from the refrigerator.
2. Connect the mains plug to a properly in-
stalled socket.
3. Insert the refrigerator into the built-in cab-
inet.
The refrigerator must be level with the
lower front edge of the built-in cabinet.
To make sure the joint profile can be
clamped, a gap of 4 mm of the entire
height between refrigerator and cabinet
panel must be kept on the opposite side
of the door hinges.
(a)
(b)
(c)
(d)
(e)
(f)
4. Screw the refrigerator to the built-in cabi-
net using the screws (e).
Q u a n -
tity
2
2
2
2
12
1
5. Open the refrigerator door and screw the
elbows (a) to the refrigerator door using
the screws (e).
18 mm
90°
(b)