Trigger - Parker Service Master CONNECT Bedienungsanleitung

Operation
6.5.4

Trigger

The Trigger measuring method starts recording of the measured val-
ues through the triggering of a defined trigger.
Recording is stopped automatically after the defined storage time has
expired.
After selecting the Trigger measuring method, the device displays a
predefined trigger and corresponding parameters to complete the mea-
surement.
1 Tap on the
Ä The configuration window opens in which to define the param-
eters.
2 Define the parameters and select a trigger according to your ap-
plication.
The following parameters are available:
Designation
Storage interval
Storage time
Recording MIN/MAX If this option is activated, the Min and Max
Pre-Trigger time
Trigger type
Auto repeat
Ring buffer
210
button.
Description
Set the storage interval of the measurement in
the format h : m : s : ms
Set the storage time for the measurement in
the format d : h : m : s When the storage time
has expired, the measurement stops automati-
cally
measured values are also recorded in addition
to the current measured value
Define the period of time in which the mea-
sured values have already been recorded prior
to the trigger being triggered
Select the trigger type for the measurement
When the option is activated, the measurement
is started again the next time the trigger is trig-
gered after automatic storage of the previous
measurement
If this option is activated, the defined memory
area is continuously overwritten by current
measured data
The Parker Service Master CONNECT V1.0/04/20