Using The Device - Dometic PI80 2 Serie Montage- Und Bedienungsanleitung

Hobs and Combinations
You must use a rigid gas line for the connection.
Observe the following instructions for the connection:
• Observe the national requirements.
• Use only steel pipe ∅8 x 1 mm (welded, seamless steel or stainless steel)
• Fasten the gas line to the side or rear wall of the surrounding furniture parts so that
no loads are placed on the actuators.
• The entire gas line must be free of stress.
➤ Connect the pipes as shown (fig. e, page 13).
➤ Attach a sign above the device with the following text:
"WARNING!
When cooking, additional ventilation must be provided, for example, by open-
ing windows near the device.
The device must not be used as a space heater."
➤ Open the gas supply.
!
WARNING! Beware of injury!
Never check for leaks with an open flame or near sources of ignition.
➤ Check all connections for leaks with leak spray.
There are no leaks if no bubbles form.
6.4 Connecting the device to the power supply
(models with electronic ignition only)
➤ Connect the device as shown (fig. f, page 13).
➤ Add a 1 A fuse in the plus line near the battery.
7

Using the device

7.1 Igniting a burner
!
WARNING! Beware of injury!
The complete ignition process must be visible from above and must not
be hidden by pots placed on the stove.
EN
Using the device
27