E F O R E U S I N G Y O U R B I C Y C L E - CAMPAGNOLO EKAR Bedienungsanleitung

4 - B E F O R E U S I N G Y O U R B I C Y C L E
DO NOT RIDE YOUR BICYCLE IF IT DOES NOT PASS THIS PRE-RIDE TEST
CORRECT ANY CONDITION BEFORE YOUR RIDE.
- Be sure that all of the components of your bicycle, including but not limited to
your brakes, pedals, handgrips, handlebars, frame and seating system, are in
optimum condition and suitable for use.
- Be sure that none of the components of bicycle are bent, damaged or out of
alignment.
- Check to be sure that all quick release fasteners, nuts and bolts are properly
adjusted. Bounce the bicycle on the ground and listen and look for anything
which may be loose.
- Make sure the wheels are perfectly centred. Spin the wheel to make sure that
it does not wobble up and down or from side to side, that it does not come into
contact with the fork or the brake shoes, and that the disc does not touch the
brake calipers' pads.
- Check all reflectors to make sure that they are clean, straight and securely
mounted.
- Make sure that the brake system, the brake shoes, and the brake callipers'
pads are in good condition.
- Test your brakes in the beginning of your ride to make sure that they are
operating properly.
- Learn and follow the local bicycle laws and regulations, and obey all traffic
signals, signs and laws while you ride.
If you ever any comments, questions or concerns, please contact your nearest
Campagnolo Service Center. A list of service centers may be found on our
website at www.campagnolo.com.
ENGLISH
30
C A M PA G N O L O . C O M