Connections; Connecting The Power Cord; Connecting Headphones - JVC BoomBlaster RV-NB100B Bedienungsanleitung

Connections

Connecting the power cord

Connect the power cord to a wall outlet only after
all other connections have been made.
Battery compartment
Unplug the AC power cord from the System to
supply the power through the batteries in the
battery compartment; otherwise, the System
does not work.
NOTE
The power can also be supplied through the
0
batteries. (p. 6)
When the System is turned off using the
0
[STANDBY/ON D] button, the standby mode
is activated and the STANDBY indicator lights in
red.
A small amount of power is always consumed
0
even while on standby.
CAUTION
Only use JVC power cord provided for this
0
System to avoid malfunction or damage to the
System.
Remove all the batteries when using the power
0
cord.
Be sure to unplug the power cord from the outlet
0
when going out or when the System is not in use
for an extended period of time.
Power cord
(supplied)
AC outlet

Connecting headphones

Be sure to turn down the volume before connecting
or putting on the headphones.
Connecting the headphones deactivates the
0
speakers.
Stereo mini plug
Headphones
(not supplied)
11