Rehau RAUSIKKO C3 X Einbau Und Wartung Seite 33

33
EN
For connecting
▪ KG pipes DN110–DN500
▪ RAUSIKKO pipes DN ID350
a round matrix with a suitable
nominal diameter should be
opened. The designation of the
nominal diameters is given on the
upper vertex of the circular matrix.
Sawing out can be carried out with a suitable annular core
drill bit or a fine-toothed saw. For connecting RAUSIKKO
pipes DN ID 350, the matrix for KG pipes DN 400 should be
opened.