General - Rehau Rausikko C3 X Einbau Und Wartung

01 General

Safety information
Legal notice
Range of application
The RAUSIKKO C3 type X is used as an inspection, cleaning and
connection system for RAUSIKKO box soakaways or retention
systems. It can also be used for RAUSIKKO pipe trenches.
If installed in a technically correct
manner, the RAUSIKKO C3 type X
can be loaded in line with SLW 60
with a coverage of the shaft
element of at least 80 cm as well
as a base depth of up to 4.0 m.
Installation is carried out above the
maximum groundwater,
impounded water or stratum water
level that is to be expected.
Installation conditions in deviation
from these must be clarified with
the REHAU Applications Enginee-
ring Department.
Important information
Your benefits
SLW 60
≤ 4,0 m
≥ 0,8 m
max. GW
Installation conditions
RAUSIKKO C3
25
EN
GOK
≥ 0 m