Using The Hdmi Control; Using The Hdmi Control Functions; Blue - Pioneer KURO PDP-LX6090 Bedienungsanleitung

13

Using the HDMI Control

Chapter 13
Using the HDMI Control

Using the HDMI Control functions

You can operate such Pioneer devices as a recorder, player, AV
system or HD AV Converter that support the HDMI Control
functions using the remote control of the flat screen TV.
The HDMI Control functions include playback of content using on-
screen control panel on the flat screen TV, recording of a TV
programme while watching, timer recording using a programme
list on the connected recorder, and confirmation of timer recording
registered in the recorder. For details, see the table below.
Note
• The KURO LINK function name used on the web and in
catalogues is referred to as HDMI Control in the operating
instructions and on the product.
• Maximum number of devices that can be connected and
controlled using the remote control unit of the flat screen TV is
as follows: recorder x 2, player x 2, AV system or HD AV
Converter x 1.
• Not all device operations may be available for HDMI Control
functions.
HDMI Control functions
Function Description
Playback of
The proper input source is
content
automatically selected and the
content is played back on the flat
screen TV as you press PLAY on the
connected device
On-screen Recorder/player operation can be
control
controlled on-screen or with the
remote control unit of the flat
screen TV (play, stop, fast forward/
reverse, etc.)
Recording of
The programme now watching can
TV
be recorded using the remote
programme
control unit of the flat screen TV
Timer
Timer recording using a
recording
programme list on the recorder
connected
Confirmation Recording schedule registered in the
of recording
recorder can be displayed and
schedule
confirmed on the screen using the
remote control unit of the flat screen TV
Display Information on the display menu
Language
language is transferred to the
Setup
recorder or player connected to the
flat screen TV. For details, see the
operation manual that came with
the recorder or player.
74
Downloaded From TV-Manual.com Manuals
En
Function
AV system
control
Power On
Power Off
HD AV
Converter
control
Usable
devices
Recorder/
player
P
EXIT
Recorder/
player
HOME
MENU
Recorder
MENU
Recorder
Note
• When using the HDMI Control functions, operate the remote
Recorder
control unit while pointing it toward the remote control sensor
(t) located at the bottom right of the front panel of the flat
screen TV.
• You cannot use two or more HDMI terminals at the rear of the
Recorder/
flat screen TV at the same time except "Power Off" and "Display
player
Language Setup" functions.
Description
Receiver/amplifier operation can
also be controlled with the remote
control unit of the flat screen TV
(volume, surround mode and input
selection of the HDMI terminal)
The connected recorder can be
turned On when the flat screen TV
is turned On.
The flat screen TV can be turned
On when the connected
recorder(s) or player(s) is turned
On and images are input to the flat
screen TV.
The connected device(s) can be
turned Off when the flat screen TV
is turned Off
An HD AV Converter can also be
connected and controlled (For
details, see page 77)
• Press i+/– or e to adjust
volume for the AV system.
• Press , , , , ENTER,
RETURN (
GREEN, YELLOW, BLUE )
buttons to use such functions
as the disc navigator and
EPG
electronic programme guide
DVD
TOPMENU
(EPG) on the connected
/GUIDE
recorder or player.
ENTER ENTER
RETURN RETURN
Usable
devices
AV system
Recorder
Recorder/
player
Recorder/
player/AV
system
HD AV
Converter
) or colour (RED,