Labeling Tv Channels; Sorting Preset Tv Channels - Pioneer KURO PDP-LX6090 Bedienungsanleitung

Setting up

Labeling TV channels

You can name TV channels that you have set up, using up to five
characters. This may help you easily identify the channels during
selections.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Analogue TV Setup" (/ then ENTER).
The password entry screen appears. Enter your four-digit password
using 0 to 9.
4 Select "Label" (/ then ENTER).
5 Select "Programme Entry" (/).
6 Select a programme number (/).
You can select 1 through 99.
Label
Programme Entry
Label
7 Select "Label" (/ then ENTER).
The name entry screen appears.
8 Select the first character (/// then ENTER).
1 2 3 4 5
A B C D E
K L M N O
U V W X Y
& ' ( ) +
The cursor moves to the second character.
9 Repeat step 8 to enter up to five characters.
To correct entered characters, select [] or [] on the screen, and
then press ENTER. The cursor moves to the preceding or
subsequent character.
To delete the current character, select [Delete] on the screen, and
then press ENTER.
To put a space for the current character, select [Space] on the
screen, and then press ENTER.
10 To complete the name entry, press / or / to select
[OK] on the screen, and then press ENTER.
11 Press HOME MENU to exit the menu.
Note
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as a
VCR or DVD/HDD recorder (DVR).
Downloaded From TV-Manual.com Manuals
1
6 7 8 9 0
F G H I J
Delete
P Q R S T
Space
Z , . : ;
- * / _ @ OK

Sorting preset TV channels

Use the following procedure to change the sequence of the preset
TV programmes.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Analogue TV Setup" (/ then ENTER).
The password entry screen appears. Enter your four-digit password
using 0 to 9.
4 Select "Sort" (/ then ENTER).
The sort screen appears.
Sort
09
01 AAAAA 10
02 BBBBB 11
03 CCCCC 12
04 DDDDD 13
05 EEEEE 14
06 FFFFF 15
07 GGGGG 16
08 HHHHH 17
5 Select a channel to be shifted (/// then ENTER).
6 Select a new location (/// then ENTER).
Sorting is executed.
7 Press HOME MENU to exit the menu.
Note
• To change a page on the Sort screen in step 4, select / on
the screen with / to select a page, and then press ENTER.
• The above procedure transfers and sets only the shifted channel
information to recording equipment such as a VCR or DVD/
HDD recorder (DVR).
1/4
IIIII 18 RRRRR
JJJJJ 19 SSSSS
KKKKK 20 TTTTT
LLLLL 21 UUUUU
MMMMM 22 VVVVV
NNNNN WWWWW
23
OOOOO 24 XXXXX
PPPPP 25 YYYYY
QQQQQ
08
29
En