Setting Update Time; Starting Manual Update; Displaying Technical Information; Screen Saver - Pioneer KURO PDP-LX6090 Bedienungsanleitung

09 Enjoying DTV broadcasts

Setting Update Time

You can set the time your flat screen TV performs Auto Update each
day. To use this function, set "Auto Update" to "On" first.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "DTV Setup" (/ then ENTER).
4 Select "Software Update" (/ then ENTER).
5 Select "Set Update Time" (/ then ENTER).
6 Set a time for Auto Update (/// or 0 to 9).
Set Update Time
Time
:
11 32

Starting Manual Update

This function allows you to manually execute Software Update.
1 Repeat steps 1 to 4 provided for Setting Update Time.
2 Select "Start Manual Update" (/ then ENTER).
Note
• For Manual Update to start, there must be approximately two
hours left before the start of the next preset recording/watching,
or the next scheduled Auto Update.
• You can select "DTV Setup" only when watching DTV channels.

Displaying technical information

Use this function to check the hardware/software version number.
1 Repeat steps 1 to 4 provided for Setting Update Time.
2 Select "Technical Information" (/ then ENTER).
Note
• You can select "DTV Setup" only when watching DTV channels.
44
Downloaded From TV-Manual.com Manuals
En
Using MHEG application (UK only)
Some stations bring you programmes with the MHEG (Multimedia
and Hypermedia Expert Group) application encoded, letting you
experience DTV interactively.
When provided, the MHEG application will start when you press any
of the colour buttons or m.
Note
• This function may not work properly when subtitle is activated
(see page 40).

Screen Saver

The screen saver automatically starts when no operation is
performed for three minutes while receiving DTV radio channels.
Note
• While the screen saver is active, you can perform the following
operations:
• Press TV/DTV to switch to analogue TV.
• Press any other button to switch to the normal radio
channel screen.
• Programme Timer is active while the screen saver is
displayed.