Using I/O Link.a; I/O Link.a - Pioneer KURO PDP-LX6090 Bedienungsanleitung

Using with other equipment
T
W
Rear view
a
b
c
When SR+ is not used (a, b and c):
The control cables (commercially available) are mono sound cables
with mini plugs (no resistance).
When SR+ is used (a):
Use the SR+ cable (available as option).
Downloaded From TV-Manual.com Manuals

Using i/o link.A

T
W
The flat screen TV incorporates three typical i/o link.A functions for
smooth connections between flat screen TV and other audiovisual
equipment.
One Touch Play
While the flat screen TV is in standby mode, it automatically turns
on and plays back images from the audiovisual source (e.g. VCR,
DVD).
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR has the
WYSIWYR button, you can automatically start recording by pressing
the WYSIWYR button.
CONTROL
Preset Download
IN
Automatically transfers channel preset information from the tuner
OUT
on the flat screen TV to the one on the connected audiovisual
equipment (e.g. VCR) via the INPUT 2 or INPUT 3 terminal.
Selecting the SCART terminal for use with
CONTROL
IN

i/o link.A

OUT
The INPUT 2 and INPUT 3 terminals on the flat screen TV are
available for use with i/o link.A. Select which is to be used.
1
2
CONTROL
IN
3
OUT
4
5
Press HOME MENU.
Select "Setup" (/ then ENTER).
Select "i/o link.A" (/ then ENTER).
Select a setting (/ then ENTER).
Item Description
INPUT 2 (default) INPUT 2 is available for i/o link.A
INPUT 3 INPUT 3 is available for i/o link.A
Press HOME MENU to exit the menu.
Note
• The i/o link.A functions work only when the audiovisual
equipment is connected to the INPUT 2 or INPUT 3 terminal on
the flat screen TV with i/o link.A via a fully wired 21-pin SCART.
• Refer to operation manuals of each external equipment for the
details.
• If a SCART cable has been connected to the INPUT 3 terminal
with the i/o link.A activated, input signals (other than
Component) are automatically identified and displayed. If the
i/o link.A has been deactivated, Video is always selected for
signals other than RGB because the system cannot identify
among RGB, Y/C (S-Video), and CVBS (Video) signals; for
example, receiving Y/C (S-Video) signals results in monochrome
display.
12
65
En