Using The Controls; Switching On; Using The Remote Control - Toshiba REGZA AV55 DIGITAL-Serie Bedienungsanleitung

CONNECTING YOUR TV

Using the controls

Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.

Switching on

If the RED LED is unlit check that the mains plug is connected
to the power supply. If the picture does not appear press
the remote control, it may take a few moments. The GREEN
LED will be lit.
To put the television into Standby press
control. To view the television press
take a few seconds to appear.

Using the remote control

Press M on the remote control to see the menus.
The menu appears as a list of five topics. As each symbol is
I i
selected by pressing or on the navigation ring on the
remote control, its respective options will appear below.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however some items are greyed out
in each case.
GREEN LED - Active standby (digital only)
1
on the remote
1
again. The picture may
RED LED – Standby
GREEN LED – Power on
To use the options, press
move up and down through them and Q,
required choice. Follow the on-screen instructions. The
functions of each menu are described in detail throughout the
1
on
manual.
To alter the volume press –
To alter the programme position press
Press MENU and
options.
Press MENU to finish.
To select an external input, press
input source is selected as described on page 32.
Please always refer to the owner's manual of the equipment to
be connected for full details.
Please note: Inserting the headphone plug will mute the sound
from all speakers.
10
COMMON INTERFACE
The Common Interface
is for a Conditional
Access Module (CAM).
Contact a service
provider.
Headphone jack
Standby
U u
and on the remote control to
I
or
Using the controls
2
+.
b p B
I i U u
, , or to control the sound and picture
o
until the appropriate
i
to select the
.