Vox Selection; Channel Scan; Call Tones - Topcom TwinTalker 6800 Bedienungsanleitung

13.8 Monitor
You can use the MONITOR feature to check for weaker signals in the current channel.
• Press
seconds for contiuous monitoring.
• Press
PTT

13.9 VOX Selection

The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended If you plan to use your radio in a noisy or windy environment.

13.10 Channel Scan

CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to
8.
When an active signal (one of 8 channels) is detected, press
channel and continue to search for another active channel

13.11 Call Tones

A call tone alerts others that you want to talk.
a. Setting the Call Tone
Topcom Twintalker 6800
Downloaded from www.Manualslib.com
and simultaneous to activate channel monitoring. Hold these buttons for 3
to stop monitoring
• Press 3 times.
• Press to turn the VOX feature ON and press
VOX sensitivity level which is indicated in the right corner of the display.
Press until OF appears on the display, to turn VOX OFF.
• In the VOX mode, the VOX icon will be displayed.
• To confirm your selection and return to the NORMAL mode, press
• Press and hold
• Release the buttons.
• When an active signal (one of 8 channels) is detected, CHANNEL SCAN
pauses and you will hear the active signal.
• Press to communicate through the active signal channel. Press
PTT
deactivate channel scan.
5 different Call Tones can be selected.
• Press 4 times. CA will be displayed.
• Press or to select another call tone or select OF to enable call tones.
• Press to confirm your selection and return to the standby mode.
PTT
manuals search engine
. Press briefly to start scanning.
Topcom Twintalker 6800
again to select the
PTT
or to bypass the current
.
to
11