Topcom TwinTalker 6800 Bedienungsanleitung Seite 12

Topcom Twintalker 6800
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.
13.12 Roger Beep On/Off
After the
PTT
stopped talking.
13.13 Key-Tone On/Off
When a button is pressed, the unit will beep briefly.
13.14 Dual Channel Monitor function
In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive
signals transmitted on that channel and CTCSS code.
Dual Channel Monitor allows you to monitor a second channel with CTCSS code.
When the Dual Channel Monitor function is activated, the PMR will switch sequentially be-
tween the standby channel + CTCSS and the Dual Channel + CTCSS.
12
Downloaded from www.Manualslib.com
- button is released, the unit will send out a roger beep to confirm that you have
To set the Roger Beep.
• Press 5 times. 'ro' will be displayed.
• Press to enable (ON) or
• Press to confirm your selection and return to the standby mode.
PTT
To set the key-tone.
• Press 6 times. 'to' will be displayed.
• Press to enable (ON) or
• Press to confirm your selection and return to the standby mode.
PTT
• Press 7 times, DCM OFF appears on the display.
• Press or to change the channel.
• Press to confirm the channel selection and go to CTCSS SUB-
CHANNEL SELECTION
• Press or to change the CTCSS.
• Press to confirm.
PTT
To disable the function select 'OFF' when setting the channel.
manuals search engine
disable the Roger-Beep (OF).
disable the Roger-beep (OF).
Topcom Twintalker 6800