Topcom TwinTalker 6800 Bedienungsanleitung Seite 10

Topcom Twintalker 6800
13.4 Receiving a Signal
13.5 Transmitting a Signal
13.6 Changing Channels
The PMR has 8 available channels.
To change channels:
NOTE: Any PMR set on the same channel can receive and listen to the
conversation, also when the other use a CTCSS code.
13.7 CTCSS (Continuous Tone Coded Squelch System)
The 2 digit CTCSS code corresponds to a specific tone frequency the radio emits. Two users,
with the same channel and CTCSS set can hear one another.They will not be able to hear
anyone else on the channel unless the other radios have the same exact CTCSS code ena-
bled.
The PMR has 38 CTCSS codes available.
NOTE: Any PMR set on the same channel can receive and listen to the
conversation, also when the other use a CTCSS code.
10
Downloaded from www.Manualslib.com
The unit is continuously in the RECEIVE mode when the unit is ON and not
transmitting. When you receive a signal on the current channel, the RX icon is
displayed.
In order for other people to receive your transmission, they
must be set on the same channel and CTCSS code.
• Press and hold
PTT
• Hold the unit in a vertical position with the MICROPHONE 10 cm from the
mouth and speak into the microphone.
• Release when you have finished transmitting.
PTT
• Press once, the current channel number flashes on the LCD Screen.
• Press or to change the channel.
• Press to confirm your selection and return to the NORMAL mode.
PTT
• To confirm and shift to the next option, press
• Press twice, the CTCSS code will flash
• Press or to select another code.
• Press to confirm your selection and return to the NORMAL mode.
PTT
• To confirm and shift to the next option, press
manuals search engine
to TRANSMIT.
.
.
Topcom Twintalker 6800