Hitachi RAS-25CNH2 Bedienungsanleitung Seite 8

MANUAL OPERATION [Heating
I Please use under below condition when you want to set the function mode, room temperature and
fan speed by manually.
HEATING
Outdoor Temperature
21°C below
1
OPERATION MODE SELECTION
G
Every time you press the button, the mode will change as the below
sequence
(Auto) [ (Heat) [
2
ROOM TEMPERATURE SETTING
Up
°C
Down
G
The cooling operation does not start if the
temperature setting is higher than the current
room temperature.
3
FAN SPEED SETTING
G
Every time you press the button, fan speed will change as
below sequence.
G
HEATING }
COOLING
G
DEHUMIDIFYING
4
Press the
G Operation start with a signal received sound "beep".
STOP Press the
G
As the settings are stored in memory in the remote control unit, you
only have to press the
same setting next time.
DEHUMIDIFYING
Room Temperature
16°C above
(Dry) [ (Cool)
I Recommend Temperature
Heating 20~24°C
Dehumidify 20~26°C
Cooling 25~28°C
: AUTO [ HIGH [ MED [ LOW
: (
[ [
: LOW (FIXED)
: ( )
(START/STOP) button
(START/STOP) button
(Start/Stop) button in order to use the
Dehumidify
G G
COOLING
Outdoor Temperature
22°C above
)
[
– 8 –
Cooling]
HITACHI
HITACHI
°C
HITACHI
°C
HITACHI
°C
°C