Customizing Sound Quality (Custom) - Sony Network Walkman NW-HD1 Bedienungsanleitung

Customizing sound quality
(Custom)
You can adjust the sound quality for each
frequency range individually, checking the
settings on the display.
1
After selecting "Sound" in step
2 in "Changing Sound Quality
and Settings" (  page 27), select
"Custom 1" or "Custom 2" of
"Sound EQ."
2
Press 
frequency range.
There are six frequency ranges.
Frequency range
3
Press  or
level.
The sound level can be adjusted in seven
levels.
30
or  to select the
 to select the sound
Sound level
4
Repeat steps 2 and 3 to make
adjustments for the remaining
frequency ranges.
5
Press  .
The MENU display appears.
To cancel set up
Press MENU to return to the MENU display.
Press and hold MODE or press MENU in the
MENU display to return to the display before
step 1.
To return to the display where you select
a MODE
Press MODE.
Notes
• If the sound is distorted by your sound settings
when you turn up the volume, turn the volume
down.
• If you feel difference in sound volume between
the "Custom 1" or "Custom 2" sound setting and
other sound settings, adjust the volume to your
preference.