V
ISO
1000 V
8.4 AC/ DC voltage measurement
and
.
-
Press the
8.5 Current measurement by means of optional AC/ DC current clamp adapter
BENNING CC 3
-
Press the
8.6 Insulating resistance measurement R
The PV generator must be isolated from the electric power supply!
Neither the positive nor the negative pole of the PV generator must be earthed!
If a voltage of > 30 V is applied to the test object, the determined voltage will
be displayed and the R
measuring probes to a voltage source during R
fuse of the BENNING PV 2 might trip!
and
and connect the test object.
-
Press the
-
Press the
-
-
Press the
and
and connect the test object.
-
Press the
-
Press and hold the
-
Press the
-
-
Press the
12/ 2017
to store the measured value to the next storage location available.
to store the measured value to the next storage location available.
(2-pin)
ISO
measurement will be blocked! Do not connect the
ISO
.
to store the measured value to the next storage location available.
-
to terminate the continuous measurement.
to store the measured value to the next storage location available.
Limiting value of insulating resistance
to select the Mode
.
measurement, as the built-in
ISO
and
.
will
and
.
.
25