hanseatic HSBS17990WEHEBK Gebrauchsanleitung Seite 90

Page EN-42 Start-up
NOTICE
Risk of damage!
If the cooling unit has been transport-
ed horizontally, lubricant from the com-
pressor may get into the cooling circuit.
■ If possible, do not tilt the cooling ap-
pliance horizontally.
■ Allow the appliance to stand upright
for approx. 2 hours after transport
and before connecting. This allows
the lubricant enough time to flow
back into the compressor.
• Insert the mains plug into an easily acces-
sible socket (220–240 V~ / 50 Hz).
When you open one of the appliance doors,
the interior of the appliance is lit up.
You will find all important information
about operation from page EN-14.