Optional Components - Miele A 315 Gebrauchsanweisung

Optional components

– A 800, reusable tubular filter with a filtration grade of ≥ 0.07 mm,
405 mm long,  22.5 mm
– A 801, threaded adapter
– A 803, holder for dental transmission instruments, height 76.5 mm,
width 40 mm, depth 32 mm
– A 813, two-piece adapter with 4 screw threads for various irrigation
connectors, height approx. 48 mm, Ø 45 mm, 4 nozzles with silic-
one hoses and 3 blind stoppers
– A 814, holder with screw cap for reprocessing the tips of air scalers
and piezo scalers, height approx. 41 mm, Ø 16 mm
– A 817, irrigation sleeve, length 65 mm, Ø 11 mm, cap with opening
Ø 6 mm
– A 818, 12 caps for irrigation sleeves, opening Ø 2 mm
– A 836, nozzle set for e.g. dental applications, consisting of
22 x A 833, injector nozzle with aperture on the side,
length 110 mm, Ø 4 mm
– A 837, irrigation sleeve set for e.g. ENT applications, consisting of
22 x A 817, irrigation sleeve for instruments Ø 4–8 mm, length
67 mm, Ø 11 mm, cap with aperture Ø 6 mm
– AUF 1, two-piece adapter for transmission instruments (dental
handpieces, for example), height approx. 48 mm, Ø 45 mm; silicone
adapter (ADS) required for reprocessing
– E 336, irrigation sleeve, length 121 mm, Ø 11 mm
– E 442, irrigation sleeves for instruments Ø 4 - 8 mm, 121 mm long,
Ø 11 mm, cap with aperture Ø 6 mm
– E 443, irrigation sleeves for instruments Ø 8 - 8.5 mm, 121 mm
long, Ø 11 mm, cap with aperture Ø 10 mm
– E 445, 12 caps for irrigation sleeves, aperture Ø 6 mm
– E 446, 12 caps for irrigation sleeves, aperture Ø 10 mm
– E 447, Luer Lock Adapter  for Luer Lock 
– E 499 for reprocessing suction and rinsing cannulae with a variety
of connector types as well as Veress cannulae.
– FP 20, 20 filter plates, Ø 30 mm
Further components are available from Miele as optional extras.
en - Items supplied
35