Werbung
110
Installation in the car
Important: Correct seat belts
This is a 3-point-belt
Make sure that any airbag in
front of the Stokke® iZi Sleep™ by
BeSafe® is deactivated, this means
turning the airbag OFF so it DOES
NOT inflate if you have an accident.
Consult your cars user guide if in
doubt on how to deactivate the
airbag. Make sure that the Stokke®
iZi Sleep™ by BeSafe® is placed in a
rear facing position.
Make sure the carrying handle (10)
is in the carrying position.
Pull the 3-point-belt around the
back of the Stokke® iZi Sleep™ by
BeSafe® and fasten the seat belt
with a 'click' . Make sure the lap
belt of the 3-point-belt is placed
between base (16) and lower seat
shell.
Pull the 3-point-belt through the shoulder belt guide
(12) and belt slot (14), only at the buckle side. Follow the
blue indications on the seat. Tighten the 3-point-belt
firmly around the Stokke® iZi Sleep™ by BeSafe®.
Downloaded from
www.Manualslib.com
OK
Shoulder belt
manuals search engine
NO
Lap belt
This is a 2-point-belt
12
14
10
16
2
Werbung
Kapitel
