be cool BC11KL2002F Bedienungsanleitung Seite 32

Preparing the remote control – inserting or replacing batteries
First use of the remote control:
Remove the transparent insulating strip from the battery housing by gently
pulling it out.
Replacing the battery:
To replace the battery, you have to pull out the battery compartment on the back of the
remote control – please follow the following steps:
1. Use a pin:
2. Press the pin down and pull out the
battery compartment :
3. Replace the battery – and always pay
attention tot he polarity markings (+/-)
inside the compartment:
4. Insert the battery compartment fully
into the remote control again:
If the remote control has to be replaced or disposed of, you must take the batteries out and
dispose of them in accordance with the applicable regulations! Also remove the batteries in
case you won't use the remote control for a longer period of time to avoid corrosion damage.
If you have to replace batteries always replace them with the same type and charge status.
NOTE
Seite 32 von 48